[c-nsp] GSR Error - Power

[Tantsura, Jeff]

Hi Paul,

Same here: %ENV_MON-2-VOLTAGE: Card 1.5v supply(slot 18) volts has reached
CRITICAL level at 1600 m(V)

Have you got any idea about how to deal with it?

Regards,
Jeff

P.S. sh env will show power related stuff

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: 20 September 2006 18:28
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] GSR Error - Power

Hi there...

We just fired up a GSR here and I'm getting the following error:

%ENV_MON-2-VOLTAGE: Card 5v supply(slot 26) volts has reached CRITICAL
level at 0 m(V)

This GSR only has one of two DC power supplies online at the moment.  Is
this error because only one power supply is online?  The Cisco site
doesn't give us a lot of info... also is there a command on GSR that
shows "power status" ?

Thanks,

Paul Stewart
Network Administrator
Nexicom Inc.
http://www.nexicom.net/ 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/