[c-nsp] Vlans + PIX 515

[Brian Johnson]

I don't think this can be done.

Why would you do this? What are you trying to accomplish?

Brian 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Eusebio López
> Sent: Friday, September 22, 2006 4:58 AM
> To: Laurent Geyer; Brian Desmond
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Vlans + PIX 515
> 
> hi
> 
>  
> 
> I believe that I have not explained myself. I already have 
> the port trunk formed and working.
> 
>  
> 
> what I want to do is to put a port in "switchport mode 
> Access", but that works at the same time for two vlans. 
> 
>   _____  
> 
> De: Laurent Geyer [mailto:lgeyer at 085zehn.com] 
> Enviado el: viernes, 22 de septiembre de 2006 5:32
> Para: Brian Desmond
> CC: Eusebio López; Amol Sapkal; Shakeel Ahmad; 
> cisco-nsp at puck.nether.net
> Asunto: Re: [c-nsp] Vlans + PIX 515
> 
>  
> 
>  
> 
> On 9/21/06, Brian Desmond <brian at briandesmond.com> wrote:
> 
> Yeah you need to trunk the port on the switch
> 
> Interface FastEthernet0/1
>         switchport mode trunk
>         switchport trunk encapsulation dot1q
>         switchport trunk allowed vlans xxx,yyy
> 
> 
> Slight correction, if the switch supports  isl and dot1q you 
> won't be ablet to set the switchport mode to trunk unless  
> the encapsulation method is defined first.
> 
> int fa0/1
>   switchport trunk encapsulation dot1q 
>   switchport mode trunk
>   switchport trunk allowed vlans xxx,yyy
> 
> This is assuming that he has a Catalyst that runs IOS...
> 
> - Laurent
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>