[c-nsp] BGP memory on a 6500
Paul Stewart
pstewart at nexicomgroup.net
Tue Sep 26 17:37:35 EDT 2006
Hi there....
You are correct... bgp tables are stored in msfc memory...
How many feeds are looking at and are they full or partial?
Paul Stewart
Network Administrator
Nexicom Inc.
http://www.nexicom.net/
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rick Kunkel
Sent: Tuesday, September 26, 2006 4:24 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] BGP memory on a 6500
Hello all,
I'm considering a 6500, and am trying to assemble a list of required
components. I'm looking at the Sup2 with PSC2 and MSCF2. You can get
the MSFC with 512MB of RAM. Is THIS the RAM that the BGP routing table
would be used, or is that stored elsewhere? If elsewhere, then where?
THanks,
Rick Kunkel
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list