[c-nsp] BGP memory on a 6500

Rick Kunkel kunkel at w-link.net
Tue Sep 26 17:38:29 EDT 2006


Maybe up to 3 full ones.....

Rick

On Tue, 26 Sep 2006, Paul Stewart wrote:

> Hi there....
> 
> You are correct... bgp tables are stored in msfc memory...
> 
> How many feeds are looking at and are they full or partial? 
> 
> Paul Stewart
> Network Administrator
> Nexicom Inc.
> http://www.nexicom.net/  
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rick Kunkel
> Sent: Tuesday, September 26, 2006 4:24 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] BGP memory on a 6500
> 
> Hello all,
> 
> I'm considering a 6500, and am trying to assemble a list of required
> components.  I'm looking at the Sup2 with PSC2 and MSCF2.  You can get
> the MSFC with 512MB of RAM.  Is THIS the RAM that the BGP routing table
> would be used, or is that stored elsewhere?  If elsewhere, then where?
> 
> THanks,
> 
> Rick Kunkel
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 




More information about the cisco-nsp mailing list