[c-nsp] FSWM vs. IOS-FW

[Ge Moua]

See FWSM features below:
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_data_sheet090
0aecd80281886.html

There are many FWSM features that IOS-FW do not have.  We have a large
deployment base here at UMN-TC.

:-)
Regards,
Ge Moua | Email: moua0100 at umn.edu

Network Design Engineer
University of Minnesota | Networking & Telecommunications Services
2218 University Ave SE | Minneapolis, MN 55414-3029
Office: 612.626.2779 | Pager: 612.###.#### | Fax: 612.626.1818
 
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of matthew zeier
Sent: Thursday, September 28, 2006 3:28 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] FSWM vs. IOS-FW


What's the reason to use a FWSM versus just IOS-FW on a 6500 platform?

Management's asking - need good ammo.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/