[c-nsp] Persistent Loops?

[Christian Koch]

 seems this ended up being a hardware issue..

See my other email about help with hardware routing table



-----Original Message-----
From: Jared Mauch [mailto:jared at puck.nether.net] 
Sent: Wednesday, September 27, 2006 6:01 PM
To: Bruce Pinsky
Cc: Christian Koch; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Persistent Loops?

On Wed, Sep 27, 2006 at 11:47:15AM -0700, Bruce Pinsky wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Why do you have your default routes pointing at the interfaces and not

> the nexthop IP addresses?

	because it's a reasonable thing to do as some router vendors are
wonky ;)

	sometimes it's best to tie the static route to both an interface
and next-hop ip (in the case of multiaccess media, eg: flavors of
ethernet)

> Looks to me like you've got a routing loop of some sort.  Without a 
> bit more detail, it's a bit difficult to diagnose.

--
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only
mine.