[c-nsp] %LC-6-PSA_UCODE_NO_SUPPORT: Current bundle does NOT support (Link bundling)

[Peter Kranz]

Any quick hits on how to solve this:

SLOT 3:Apr 17 11:51:02: %LC-6-PSA_UCODE_NO_SUPPORT: Current bundle does NOT
support (Link bundling)

On a GSR 12008 running a Engine 2 3 port GigE card

Relevant config/details:

IOS (tm) GS Software (GSR-K4P-M), Version 12.0(28)S2, RELEASE SOFTWARE (fc1)

gsr-k4p-mz.120-28.S2.bin

LC-Slot3> sho hardware
Cisco Internetwork Operating System Software 
IOS (tm) GS Software (GLC1-LC-M), Version 12.0(28)S2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 21-Dec-04 19:38 by pwade
Image text-base: 0x40010EAC, data-base: 0x41000000

ROM: System Bootstrap, Version 12.0(20030207:104401) [jkuzma-rommon 16.12]
RELEASE SOFTWARE
ROM: GS Software (GLC1-LC-M), Version 12.0(28)S2, RELEASE SOFTWARE (fc1)

 LC-Slot3 uptime is 20 weeks, 3 days, 3 hours, 5 minutes
System restarted at 14:21:08 PDT Sat Nov 25 2006
Running default software

cisco GE-3 (R5000) processor (revision 0x0C) with 262144K bytes of memory.
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1
Last reset from mbus reset

interface Port-channel1
 description Traffic to GSR-365-Backup
 ip address x.y.z x.y.z
 no ip redirects
 no ip unreachables
 no ip directed-broadcast
 no ip proxy-arp
 ip ospf authentication
ip ospf cost 10
 ip ospf priority 3
 channel-group minimum active 1
 no channel-group bandwidth control-propagation
 hold-queue 600 in
!
interface GigabitEthernet3/2
no ip address
 no ip redirects
 no ip unreachables
 no ip directed-broadcast
 no ip proxy-arp
ip ospf cost 10
 ip ospf priority 3
 no negotiation auto
 channel-group 1

Peter Kranz
Founder/CEO - Unwired Ltd
www.UnwiredLtd.com
Desk: 510-868-1614 x100
Mobile: 510-207-0000
pkranz at unwiredltd.com