[c-nsp] Log message PM_SCP-SP-2-LCP_FW_ERR_INFORM (Matti Saarinen)

[bill buhlman]

Matti,
  I also have seen this error log:
   
  *Apr 14 04:29:45 PDT: %PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 4 is experiencing the following error:
Port 0 BCast Suppress Value Changed: exp: 0xf actual:0x0
   
  We have a 7606/sup 2, 12.1(27b)E1 with the same X6408A module in slot 4. We do have broadcast suppression running on both supervisor 2 gig eth ports but do not know why error log shows from mod 4.
   
  interface GigabitEthernet1/1
 description Link to DCP
 switchport
 switchport access vlan 100
 storm-control broadcast level 10.00
 storm-control multicast level 10.00
 storm-control unicast level 10.00
 no cdp enable
end
  !
interface GigabitEthernet1/2
 description Link to 3500 Ext
 switchport
 switchport access vlan 101
 storm-control broadcast level 10.00
 storm-control multicast level 10.00
 storm-control unicast level 10.00
 no cdp enable
   
  Bill



  
Message: 2
Date: Wed, 18 Apr 2007 12:59:07 +0300
From: Matti Saarinen 
Subject: [c-nsp] Log message PM_SCP-SP-2-LCP_FW_ERR_INFORM
To: cisco-nsp at puck.nether.net
Message-ID: 
Content-Type: text/plain; charset=us-ascii


Last night one 6509/sup2 running 12.2(18)SXF6 logged the following
message:

%PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 6 is experiencing the following error: Port 5 BCast Suppress Value Changed: exp: 0x0 actual:0x3

I couldn't find any information what the message means. Has anyone else
seen similar? 

Module 6 is WS-X6408A-GBIC and the configuration of the interface Gi6/5
looks like this:

rtr#sh run int gi6/5
Building configuration...

Current configuration : 76 bytes
!
interface GigabitEthernet6/5
no ip address
shutdown
no cdp enable
end


Cheers,

-- 
- Matti -


------------------------------

M


       
---------------------------------
Ahhh...imagining that irresistible "new car" smell?
 Check outnew cars at Yahoo! Autos.