[c-nsp] 7200 router metro ethernet config example

[gokhan senol]

hi 
for one of the my customers i will make metro ethernet config on 7200 router
the customer already has an internet connection from another ISP
metro ethernet will be its 2nd internet connection in the same router.

below its atm connection config with ISP A

the customer wanna use both of them as redundant for each other
interface ATM2/0
 no ip address
 no atm ilmi-keepalive
!
interface ATM2/0.60 point-to-point
 ip address x.x.1.1 255.255.255.252
 pvc 0/60
  protocol ip x.x.x.1 broadcast
  encapsulation aal5snap

ip route 0.0.0.0 0.0.0.0 x.x.1.2

anyone has metro ethernet confif example for 7200.  or juct creating suninterface is enough?
and to make redundant both of the connections what should i do
also there is coming connections from outside to inside.. servers etc..

do i have to make bgp connection? or what else..
thanks a  lot

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com