[c-nsp] Cisco 3640 as PPPoE Server and PPPoE Client impossible???

[David Coulson]

Use a bba-group instead of a vpdn-group.

omar parihuana wrote:
> Hi List,
>
> Currently I have a 3640 that works like PPPoE Concentrator, rightnow I would
> like configure that router as PPPoE client too, however I have an error:
>
> Celda201#config t
> Enter configuration commands, one per line.  End with CNTL/Z.
> Celda201(config)#vpdn-group 2
> Celda201(config-vpdn)#request-dialin
> Celda201(config-vpdn-req-in)#protocol pppoe
> *%Only one PPPoE VPDN group can be configured
> *
> Actually the router have the follow configuration:
>
> vpdn enable
> !
> vpdn-group 1
>  accept-dialin
>   protocol pppoe
>   virtual-template 1
>  pppoe limit per-mac 10
>  pppoe limit per-vlan 10
> !
>
> Can I configure one router as PPPoE Server and PPPoE client simultaneously?
> How?
>
>
> Thanks!
>
>
>