[c-nsp] FWSM copy between partitions cf:4 and cf:5

[Velasquez Venegas Jaime Omar]

I'm pretty sure that reference to disk: is not the same for cf4 and
cf5.Altough I don't have a module to test this at the moment.
Usual approach to  get FWSM work on redundancy is to have a second
module working in a failover scheme (active/standby or active/active)
Hope it helps.


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jeff Fitzwater
Sent: Jueves, 02 de Agosto de 2007 08:46 a.m.
To: cisco
Subject: [c-nsp] FWSM copy between partitions cf:4 and cf:5

New user of FWSM  running and just upgraded code from 3.1 to 3.2 with
single context.

I would like to use the *cf:5* partition as a backup and need to move
the new 3.2 application code , maintenance code and config into the
partition so when I do change the boot device to *cf:5* it will come up
as functional system.

 NOTE: I am assuming this it what you have to do to have a back up
partition. 


When I am running from the *cf:4 partition (default)*, I see that all 
the files (image ADSM and config ) show up under the *flash:/*.*

*I also copied these files to the* disk: *which shows up as separate 
device.  I thought that the *disk:* might be common to both *cf:4 and 
cf:5* partitions and I could copy the files from there.


I could first boot from the *cf:5* partition and then move the files 
from the *disk:*, but then I would have to boot again to use the new
image.




Thanks for any ideas on this issue.



Jeff  Fitzwater
OIT Network Systems
Princeton UNiversity



*
*
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/