[c-nsp] gigabit ethernet hardware help
David Coulson
david at davidcoulson.net
Thu Aug 9 08:27:31 EDT 2007
Maybe I'm missing something, but since when did a 1000BaseSX GBIC
support single mode? You'll probably need a LX GBIC for this.
Sunet Sysadmin wrote:
> Hi all,
>
> we have a cisco 7200 series router and we want to terminate ADSL layer2
> user on gigabit ethernet.
> We have GBIC card in the router and we have 1000Base GBIC SX module.
> The network connection is as follows
>
> Telstra IGR(telco australia)-----------single mode
> fibre-------------demarcation point data centre ----------------single
> mode fibre flat SC connector --------------- 7200 series router
> 1000Base SX module
>
> The problem is i can't get the interface up and even if i plug/unplug
> the single fibre optic the router dowsn't seems be reacting by showing
> link up or down.
>
> The lights on the Gigabit interface keep flashing Tx,Rx,link in
> 1,2,3,1,2,3 ---- pattern.
>
> any suggestions or any help is very much appreciated.
>
> hadar#show diag
> Slot 0:
> I/O Controller Port adapter
> Port adapter is analyzed
> Port adapter insertion time 1d00h ago
> EEPROM contents at hardware discovery:
> Hardware revision 2.1 Board revision B0
> Serial number 21855274 Part number 73-4093-03
> FRU Part Number: C7200-I/O=
>
> Test history 0x0 RMA number 00-00-00
> EEPROM format version 1
> EEPROM contents (hex):
> 0x20: 01 36 02 01 01 4D 7C 2A 49 0F FD 03 00 00 00 00
> 0x30: 58 08 4A 00 00 10 08 00 00 00 FF FF FF FF FF FF
>
> Slot 1:
> Gigabit Ethernet Port adapter, 1 port
> Port adapter is analyzed
> Port adapter insertion time 1d00h ago
> EEPROM contents at hardware discovery:
> Hardware revision 1.0 Board revision A1
> Serial number 22579772 Part number 73-3144-03
> FRU Part Number: PA-1GE=
>
> Test history 0x0 RMA number 00-00-00
> EEPROM format version 1
> EEPROM contents (hex):
> 0x20: 01 98 01 00 01 58 8A 3C 49 0C 48 03 00 00 00 00
> 0x30: 51 02 73 00 00 00 00 00 00 01 FF FF FF FF FF FF
>
> Slot 2:
> Fastethernet (TX-ISL) Port adapter, 2 ports
> Port adapter is analyzed
> Port adapter insertion time 1d00h ago
> EEPROM contents at hardware discovery:
> Hardware revision 2.0 Board revision B0
> Serial number 16412105 Part number 73-2618-03
> FRU Part Number: PA-2FE-TX=, PA-2FEISL-TX=
>
> Test history 0x0 RMA number 00-00-00
> EEPROM format version 1
> EEPROM contents (hex):
> 0x20: 01 6C 02 00 00 FA 6D C9 49 0A 3A 03 00 00 00 00
> 0x30: 58 00 00 00 99 12 29 00 00 00 FF FF FF FF FF 00
>
> hadar#show ver
> Cisco Internetwork Operating System Software
> IOS (tm) 7200 Software (C7200-IK9S-M), Version 12.2(8)T5, RELEASE
> SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Sat 22-Jun-02 16:20 by ccai
> Image text-base: 0x60008940, data-base: 0x6173A000
>
> ROM: System Bootstrap, Version 12.1(20000824:081033)
> [dbeazley-cosmos_e_LATEST 101], DEVELOPMENT SOFTWARE
> BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(15)S1, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
>
> hadar uptime is 1 day, 25 minutes
> System returned to ROM by power-on
> System image file is "sup-slot0:/c7200-ik9s-mz.122-8.T5.bin"
>
> cisco 7204VXR (NPE300) processor (revision D) with 122880K/40960K
>
>
>
> cheers
> phani.
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
More information about the cisco-nsp
mailing list