[c-nsp] HP/Cisco LLDP/CDP

[Tolstykh, Andrew]

http://www.cisco.com/application/pdf/en/us/guest/products/ps7347/c1037/c
dccont_0900aecd8064772c.pdf

Also have in mind that Cisco just released a new firmware for their
3750, 3560, 2970, 2960 series switches supporting LLDP and of course
CDP.


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Uwe Sauerland
Sent: Thursday, August 09, 2007 6:05 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] HP/Cisco LLDP/CDP

Hello,

we want to provide dot1q-tunnel/l2-tunnel service based on 3560 for a 
customer.

The customer end-devices are HP ProCurve switches.

l2-tunnel on Cisco supports STP/VTP/CDP, but no LLDP (I found no other 
indication so far), and unfortunately the customer wants to use LLDP for
his 
management software (I guess the ProCurve management tool).

Any idea/experience in how to fulfil this requirement?

Thanks!

Uwe
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential
and/or privileged material.  Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon,
this information by persons or entities other than the intended recipient is prohibited.   If you received this in error, please
contact the sender and delete the material from any computer.