[c-nsp] RES: few doubts

[Thiago Lizardo de Moraes]

Dear Sharma,

	If you enable ospf, its necessary use the command 'ip ospf
mtu-ignore' on interface. 

Regards,
Thiago


-----Mensagem original-----
De: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] Em nome de Kamlesh Sharma
Enviada em: segunda-feira, 13 de agosto de 2007 08:20
Para: cisco-nsp at puck.nether.net
Assunto: [c-nsp] few doubts

Dear freinds,

Jumbo frame is a capability of the interface or it just set the MTU of
that
interface.

So if i enable jumbo frame setting on the interface than i have to use
command ip ospf mtu-ignore to form neighborship on that interface.

How a RIP running router will advertise a supernet address like
192.168.0.0/16.


Thanks
Kamlesh Sharma
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/