[c-nsp] Bridge between "Ethernet Interface" and "Serial Interface"

[Gregori Parker]

cisco has been pew pooing bvi's lately...I've never really heard a convincing argument as to why I shouldnt use them though -- anyone know?  aside from they may stop supporting it in some distant release
 
(sry, didnt mean to hijack...i would guess encapsulation mismatch is a showstopper tho)
 
-G

________________________________

From: cisco-nsp-bounces at puck.nether.net on behalf of Tojonirina RAONISOAFIANINANA
Sent: Thu 8/16/2007 11:03 PM
To: cisco-nsp at puck.nether.net
Cc: aarivo at dts.mg
Subject: [c-nsp] Bridge between "Ethernet Interface" and "Serial Interface"



Hi All,

I want to establish a bridge between an "ethernet interface" and a "serial
interface".
We have already find something like :

Router A:

interface FastEthernet1
   bridge-group 1
!
bridge 1 protocol ieee
!
bridge irb

Router B:

interface Serial1
  bridge-group 1
!
bridge 1 protocol ieee
!
bridge irb

The problem is that the encapsulation are different, so I would like to ask
if there is solution for.

Thanks in advance

Tojo
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/