[c-nsp] Bridge between "Ethernet Interface" and "Serial Interface"

[Wink]

"Local-switching"


----- Original Message ----- 
From: "Tojonirina RAONISOAFIANINANA" <tojo.raonisoa at gmail.com>
To: <cisco-nsp at puck.nether.net>
Cc: <aarivo at dts.mg>
Sent: Friday, August 17, 2007 1:03 AM
Subject: [c-nsp] Bridge between "Ethernet Interface" and "Serial Interface"


> Hi All,
>
> I want to establish a bridge between an "ethernet interface" and a "serial
> interface".
> We have already find something like :
>
> Router A:
>
> interface FastEthernet1
>   bridge-group 1
> !
> bridge 1 protocol ieee
> !
> bridge irb
>
> Router B:
>
> interface Serial1
>  bridge-group 1
> !
> bridge 1 protocol ieee
> !
> bridge irb
>
> The problem is that the encapsulation are different, so I would like to 
> ask
> if there is solution for.
>
> Thanks in advance
>
> Tojo
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.484 / Virus Database: 269.12.0/957 - Release Date: 8/16/2007 
> 1:46 PM
>
>