[c-nsp] Bridge between "Ethernet Interface" and "Serial Interface"

[Gert Doering]

Hi,

On Fri, Aug 17, 2007 at 08:46:08AM +0200, Tojonirina RAONISOAFIANINANA wrote:
> The problem is shown below:
> 
> |r1 s0| -------------- |s0 r2 eth0| -------------- |eth0 r3|
> 
> Our goal is to make the router r2 transparent

That's a *means*.  What's the underlying goal?  What sort of network problem
do you want to solve that's requiring this?

Briding over WAN lines is almost never a good idea.

What sort of other interfaces does r1 have?  Do you want to bridge to
r1's e0?  You can't bridge e0 to r1's s0 - but you could bridge r2's e0
to r1's e0.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de