[c-nsp] TE over Etherchannel

[alaerte.vidali at nsn.com]

Thanks,

Do you know if the restriction is only for dynamic path?

I have seem and tested implementations using static path where the
backup tunnel (used by FRR) takes layer 3 etherchannel, and it worked
fine during the failure simulation.

Br,
Alaerte 

-----Original Message-----
From: ext Rodney Dunn [mailto:rodunn at cisco.com] 
Sent: Monday, August 20, 2007 8:07 PM
To: Vidali Alaerte (NSN - BR/Rio de Janeiro)
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] TE over Etherchannel

That's right. I've seen that from the BU's that it's not currently
supported. I hear it's on the roadmap to be "officially" supported.

Rodney

On Mon, Aug 20, 2007 at 07:04:09AM -0500, alaerte.vidali at nsn.com wrote:
>  Have you heard such affirmation before?
> 
> "TE FRR is not supported over Etherchannel"
> 
> Under SX releases, the only feature that it says it is not supported 
> under etherchannel is DS-TE.
> I have used backup tunnel taking etherchannel and it worked for years.

> 
> Now this statement means that between two P routers layer 3 
> etherchannel cannot be used.
> 
> Tks,
> Alaerte
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/