[c-nsp] "Unrecognized cookie format" for WIC-1DSU-T1

Ed Ravin eravin at panix.com
Tue Aug 28 19:30:12 EDT 2007


We just stuck a WIC-1DSU-T1 removed from service on a different
router into a 2801.  The router says this upon bootup:

%CFG-3-CARD_NOT_SUPPORTED: Slot 3: Unrecognized cookie format for card!sslinit fn

The version info is:

Cisco IOS Software, 2801 Software (C2801-ADVSECURITYK9-M), Version 12.4(3f), RELEASE SOFTWARE (fc3)


What could be going on here?  We tried all three WIC slots, same
error.  Is something basic like T1 WIC support missing from the image,
or do I have a bad or fake WIC?  The "show diag" info is below:

        WIC/VIC/HWIC Slot 3:
        FT1 BT8360
        WIC module not supported/disabled in this slot
        Hardware revision 1.3           Board revision C0
        Serial number     28156561      Part number    800-03279-04
        FRU Part Number   WIC-1DSU-T1=

        Test history      0x0           RMA number     00-00-00
        Connector type    Wan Module
        EEPROM format version 2
        EEPROM contents (hex):
          0x20: 02 11 01 03 01 AD A2 91 50 0C CF 04 00 00 00 00
          0x30: 60 00 00 00 02 05 14 01 FF FF FF FF FF FF FF FF


More information about the cisco-nsp mailing list