[c-nsp] Multiple T1 IMA / Channelized DS3
OCOSA ListAcct
listacc at ocosa.com
Wed Aug 29 09:58:20 EDT 2007
Cool thanks that's what I thought
otis
Joe Freeman wrote:
> If they're dropping IMA T1's to an M13 mux on each end of the ChDS3,
> and going into an IMA card on the router, then that will work.
>
> The PA-MC-T3 cards and variants can't do ATM in any flavor, though.
>
> Joe
>
> On 8/28/07, *OCOSA ListAcct* <listacc at ocosa.com
> <mailto:listacc at ocosa.com>> wrote:
>
> Ok. I spoke with AT&T earlier they said that they have other customers
> taking some T1 IMAs over a channelized DS3 into the same router I was
> like how they said they would have a tech contact me I was ok. I
> thought
> maybe take the DS3 circuit into some sort of mux and split the signal
> from the IMA and send to a cross connect and then to the PA-A3-8T1IMA
> card....Can anyone shed some light here? Any help is appreciated!
>
> Otis
>
> Joe Freeman wrote:
> > PA-MC-T3 cards won't do IMA.
> >
> > That said... Does anyone have any suggestions for scaling NxDS0
> > circuits muxed to ChDS3 in a 7206 chassis beyond 12 DS3's?
> >
> > Joe
> >
> > On 8/28/07, *OCOSA ListAcct* <listacc at ocosa.com
> <mailto:listacc at ocosa.com>
> > <mailto:listacc at ocosa.com <mailto:listacc at ocosa.com>>> wrote:
> >
> > Has anyone took a channelized DS3 circuit using a (PA-MC-T3) and
> > place a
> > T1 IMA circuit for dsl aggregation on that same circuit
> filling up
> > four
> > full T1 slots? Would this be a layer 2 local switching setup
> on the
> > pa-mc-t3 card?
> >
> > Otis
> >
> >
> > _______________________________________________
> > cisco-nsp mailing list cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>
> > <mailto:cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>>
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> <https://puck.nether.net/mailman/listinfo/cisco-nsp>
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> >
>
>
More information about the cisco-nsp
mailing list