[c-nsp] BGP hardware requirements

[Dracul]

Hi All is BGP configuration ok for these scenarios?

1MB and 2MB leased line link
1MB and 1MB leased line link

(also its a v.35 and fastethernet combo)

what would be the best setup? Full routes? Def routes?

Here's the show version of the router I will be using. can it support BGP?

=====
Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(3f),
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Fri 18-Aug-06 18:47 by alnguyen

ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

gw-oberoi-bng-in uptime is 19 weeks, 8 hours, 7 minutes
System returned to ROM by reload at 08:26:42 UTC Sun Mar 18 2007
System image file is "flash:c2800nm-ipbase-mz.124-3f.bin"

Cisco 2851 (revision 53.51) with 251904K/10240K bytes of memory.
Processor board ID FHK103670G9
2 Gigabit Ethernet interfaces
2 Serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

=====

regards,
chris