[c-nsp] Question about "show sdm prefer" command output on Cat3560G

[Peter Salanki]

I disagree, you can have tons of SVIs even if your sh sdm says "8  
routed interfaces". I have never tested more than 8 physical routed  
ports though.

Sincerely,

Peter Salanki
Solutions Architect
Procera Networks

On Dec 3, 2007, at 3:32 PM, Peter Rathlev wrote:

> On Mon, 2007-12-03 at 07:23 -0500, Gary Stanley wrote:
>> 8 routed interfaces are 8 layer3 (ie: no switchport etc) ports.
>
> It's not just "no switchport" interfaces, SVIs are also routed
> interfaces in this context.
>
> Regards,
> Peter Rathlev
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/