[c-nsp] multilink bundle

[Bill Nash]

Convert it to a full data pipe and find another way to transport the voice 
traffic over it? This is out of my scope, but it seems like VOIP could be 
a winner here.

- billn

On Tue, 4 Dec 2007, Joseph Jackson wrote:

> Just to answer everyones questions here's the story. 
>  
> One end has a 7206 NPE G1 with 1 gig of ram
>  
> other end has 7204 NPE 300 with 256 megs of ram
>  
> Each router has a  PA-MC-T3= (the channelized ds3 card)  
>  
> We do have a ds3 it just has channels 1-5 stripped of it to do voice
> between the locations.  I would like to use the rest of the DS3's
> bandwidth for data but I can't seem to find a way to do that without
> just using a crap load of T1's put into multilink bundles. 
>  
>  
>  
> Any ideas?
>  
>  
> Thanks
>  
> Joseph
> 
> 
> ________________________________
> 
> 	From: Doug Clements [mailto:dclements at gmail.com] 
> 	Sent: Tuesday, December 04, 2007 5:10 PM
> 	To: Joseph Jackson
> 	Cc: cisco-nsp at puck.nether.net
> 	Subject: Re: [c-nsp] multilink bundle
> 	
> 	
> 	On Dec 4, 2007 4:49 PM, Joseph Jackson
> <JJackson at aninetworks.com> wrote:
> 	
> 
> 		Would it be considered retarded to put 23 T1's into a
> multilink bundle?
> 		
> 		
> 
> 
> 	I wouldn't try it, but assuming you're running 7500, there are
> hardware limitations:
> 	
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft
> /120t/120t3/multippp.htm#wp1025005 
> 	
> 	
> 	--Doug 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>