[c-nsp] Cisco 3400 ME switch with DC power

[John van Oppen]

Sounds like standard telco -48v DC to me.   If you are on the cheap,
check ebay, otherwise there are lots of real vendors selling them as
virtually all telco gear runs on -48v power.

If you have more detailed questions, email me off-list and I can find
you some links of examples on ebay.   For something that small there are
tons of options.

John van Oppen
Spectrum Networks LLC
206.973.8302 (Direct)
206.973.8300 (main office)

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Raymond Macharia
Sent: Wednesday, December 05, 2007 6:17 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cisco 3400 ME switch with DC power

Hello,
does anyone know where I can get an AC to DC power rectifier for the ME
3400
Switch.
there are plenty of them out there but not for this switch. I have been
trying to get info from the Cisco guys locally without any headway.
The specific switch is a Cisco ME 3400-24TS DC.
The power requirements in the data sheet are :

*Power consumption**
25W (typical), 30W (maximum), 102 Btus per hour

DC Input Voltage
 DC: -36  -72 VDC, 2.0 to 1.0A

*Thanks in advance*
*--
Raymond Macharia
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/