[c-nsp] 10G LFS function

Hiromasa Sekiguchi hiromasa.sekiguchi at ctc-g.co.jp
Wed Dec 12 05:21:22 EST 2007


Thank you for your advice.

If we don't need LFS function (e.g. use BFD), can we disable it?
Please let me know the commands how to do it.

Regards,
Hiromasa


Marian Ďurkovič wrote [2007/12/12 18:42(JST)]:
> On Tue, Dec 11, 2007 at 10:35:18AM +0900, Hiromasa Sekiguchi wrote:
>> Does cisco products support LFS function of 802.3ae?
>> We have a WS-X6704-10GE.
> 
> Sure. You can verify its operation by disconnecting just one fibre
> - both interfaces will go down immediately. This also works on 
> 1GE connections, but requires autonegotiation to be enabled.
> 
> Please note however, that RemoteFault state is not currently reported
> by CLI to the user - interface just shows "down/down (notconnect)".
> It would be much more convenient to see e.g. "down/down (remotefault)"
> in order to be able to clearly distinguish RF from other problems.                
> 
> 
> 	With kind regards,
> 
> 
> --------------------------------------------------------------------------
> ----                                                                  ----
> ----   Marian Ďurkovič                       network  manager         ----
> ----                                                                  ----
> ----   Slovak Technical University           Tel: +421 2 571 041 81   ----
> ----   Computer Centre, Nám. Slobody 17      Fax: +421 2 524 94 351   ----
> ----   812 43 Bratislava, Slovak Republic    E-mail/sip: md at bts.sk    ----
> ----                                                                  ----
> --------------------------------------------------------------------------



More information about the cisco-nsp mailing list