[c-nsp] Filtered BGP routes

[Daniel Faubel]

Forgive my ignorance but where in that reply does it show me the
filtered routes?

-Daniel Faubel


-----Original Message-----
From: Robert J. Huey [mailto:rhuey at anzus.com] 
Sent: Friday, December 14, 2007 11:56 AM
To: Daniel Faubel
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Filtered BGP routes


> How is this done using Cisco gear?

sho ip bgp nei <IP Address> ? ;  Context sensitive help is SO usefull. 
You're options may vary:

advertised-routes  Display the routes advertised to a BGP neighbor
dampened-routes    Display the dampened routes received from neighbor
(eBGP peers only)
flap-statistics    Display flap statistics of the routes learned from
neighbor (eBGP peers only)
paths              Display AS paths learned from neighbor
received           Display information received from a BGP neighbor
received-routes    Display the received routes from neighbor
routes             Display routes learned from neighbor
|                  Output modifiers

rgds,
    --r

On Fri, 14 Dec 2007, Daniel Faubel wrote:

> Hello,
>
> I have a very quick question for you guys. I have prefix and filter
> lists on my BGP peers. Using Foundry gear I am able to very quickly
see
> what routes I am not accepting from my peers by typing in:
>
> "sh ip bgp neighbors IP_ADDRESS received-routes | inc EF"
>
> How is this done using Cisco gear?
>
>
> Thanks,
> Daniel
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>