[c-nsp] Filtered BGP routes

[Peter Rathlev]

On Fri, 2007-12-14 at 13:30 -0800, Daniel Faubel wrote:
> Thanks for your help. It looks like Cisco can't do what I want.
> 
> In Foundry, if I wanted to look at what routes are being filtered from a
> BGP peer I just have to do this.
<snip>

AFAIK you can't just have the Cisco router show the filtered routes. You
can show the received routes ("show ... nei <IP> received-routes") and
the installed routes ("show ... nei <IP> routes") and then compare the
two lists, but no shortcut. :-|

Regards,
Peter Rathlev