[c-nsp] AP-1242AG config

[Joel P]

That sounds as good as anything else I have tried, will give it a shot and
see what happens.

Thanks,

Joel P

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Peter Rathlev
Sent: Monday, December 17, 2007 6:46 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] AP-1242AG config

On Mon, 2007-12-17 at 18:11 -0500, Joel P wrote:
<snip>
> !
> ip default-gateway 172.31.1.1
> ip http server
> no ip http secure-server
> ip http help-path
> http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
> !
> control-plane
> !
> bridge 1 route ip
> !
<snip>

Just a quick shot in the dark, but maybe you need the "bridge 100 route
ip" and "bridge 200 route ip" commands to enable bridging these groups?

Regards,
Peter Rathlev


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/