[c-nsp] 837 strangeness

[Adrian Chadd]

On Tue, Dec 18, 2007, Jon Lewis wrote:
> I don't know if this is nsp material...but since there's no cisco-cpe 
> list....
> 
> I've got this 837 (actually, we've got a couple of them) that I'm trying 
> to configure to take the place of other working DSL routers (zyxels, cisco 
> 827s, etc.).  The 837 doesn't seem to recognize the DSL line (atm0 never 
> comes up) and whether the line is plugged in or not, once the 837 has 
> finished booting, the DSL TXD and RXD lights strobe continuously, 
> apparently indefinitely.  That's great if you like 'blinkenlights', but 
> not so good if you want a servicable DSL router.  If it were happening 
> with just one 837, I'd write it off to a bad router...but we have a couple 
> of them doing this.  Are they all bad?

Start with "show dsl interface atm0" and see what it says?



Adrian

> 
> I've tried several different recent IOS versions so I really don't think 
> it's a software bug.
> 
> ----------------------------------------------------------------------
>   Jon Lewis                   |  I route
>   Senior Network Engineer     |  therefore you are
>   Atlantic Net                |
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
- Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support -
- $25/pm entry-level VPSes w/ capped bandwidth charges available in WA -