[c-nsp] [ASAP] STP port-state

[Hiromasa Sekiguchi]

Hi,

In what situation does "Port-State" output "type-inconsis"?
We use cat6k.

> (enable) sh spantree
VLAN 1
Spanning tree mode          PVST+
Spanning tree type          ieee
Spanning tree enabled

Designated Root             ******
Designated Root Priority    32769
Designated Root Cost        0
Designated Root Port        1/0
Root Max Age   20 sec   Hello Time 2  sec   Forward Delay 15 sec

Bridge ID MAC ADDR          ******
Bridge ID Priority          32769  (bridge priority: 32768, sys ID ext: 1)
Bridge Max Age 20 sec   Hello Time 2  sec   Forward Delay 15 sec

Port                     Vlan Port-State    Cost      Prio Portfast Channel_id
------------------------ ---- ------------- --------- ---- -------- ----------
 2/1                     1    type-inconsis         4   32 disabled 0
			      ^^^^^^^^^^^^^
Is "type-inconsis" the same meaning as "type-pvid-inconsistent"?

Thanks