[c-nsp] "ip helper address" on pix

[Bagosi Rómeó]

And if I enable the "transparent firewall" mode?

-----Original Message-----
From: Darryl Dunkin [mailto:ddunkin at netos.net] 
Sent: Thursday, December 20, 2007 7:03 PM
To: Bagosi Rómeó; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] "ip helper address" on pix

No, the only command supported is 'dhcprelay'.

http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/df.html#wp1084795 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Bagosi Rómeó
Sent: Thursday, December 20, 2007 05:25
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] "ip helper address" on pix

Hello Experts!

 

Is there a way to enable udp broadcasts (netbios, wins...) through Cisco Pix v6.3? Is there any "ip helper address" like command?

 

 

Thank You,

Romeo Bagosi

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/