[c-nsp] "ip helper address" on pix

[Justin M. Streiner]

On Fri, 21 Dec 2007, Bagosi Rómeó wrote:

> And if I enable the "transparent firewall" mode?

If you were in transparent firewall mode, then I think you'd need the 
helper addresses to be wherever you're doing your layer 3 routing for this 
network.

jms

> -----Original Message-----
> From: Darryl Dunkin [mailto:ddunkin at netos.net]
> Sent: Thursday, December 20, 2007 7:03 PM
> To: Bagosi Rómeó; cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] "ip helper address" on pix
>
> No, the only command supported is 'dhcprelay'.
>
> http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/df.html#wp1084795
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Bagosi Rómeó
> Sent: Thursday, December 20, 2007 05:25
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] "ip helper address" on pix
>
> Hello Experts!
>
>
>
> Is there a way to enable udp broadcasts (netbios, wins...) through Cisco Pix v6.3? Is there any "ip helper address" like command?
>
>
>
>
>
> Thank You,
>
> Romeo Bagosi
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>