[c-nsp] How to max out T1's on 2851

[David Prall]

Four of the VWIC2-2MFT-T1/E1

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123
t/123t_14/gthwecan.htm

David

--
http://dcp.dcptech.com


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Tuc
> at T-B-O-H.NET
> Sent: Thursday, February 01, 2007 9:29 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] How to max out T1's on 2851
>
> Hi,
>
> 	For a friend I'm posting this.
>
> 	He was told by Qwest that if he bought a 2851 that he'd
> be able to put 8 T1's on it. I was shown by a salesperson
> that 6 was considered the max. But the question still
> remained, does anyone know the modules necessary to put 8
> T1's (Or even 6) onto a 2851?
>
> 		Thanks, Tuc
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/