[c-nsp] route-map 'continue' broken in 6500 12.2(18)SXF6?

[Gert Doering]

Hi,

in December, we had this thread about "incoming route-map with continue
not working in <some> SXF* releases".

Today, I finally managed to build a test setup (because there's a router
needing an upgrade to SXF7 "real soon now"), and I can confirm that
continue (for *incoming* routes) *does* work.

Here's the setup:

 - 7603, Sup720, 12.2(18)SXF7

 - incoming route-map:

    route-map test-continue permit 10
     continue 30
     set community 5539:10000 additive
    !
    route-map test-continue deny 20
    !
    route-map test-continue permit 30
     set community 5539:30000 additive


 - eBGP peer that announces 10.10.0.0/16, with "soft in"

 - that's what I see:

    Cisco#sh ip b 10.10.0.0
    BGP routing table entry for 10.10.0.0/16, version 5556445
    Paths: (2 available, best #1, table Default-IP-Routing-Table)
    Flag: 0x820
      Advertised to update-groups:
	 2          6         
      65500
	194.97.148.100 (metric 156416) from 194.97.148.100 (194.97.148.100)
	  Origin IGP, metric 0, localpref 100, valid, external, best
	  Community: 5539:10000 5539:30000
      65500, (received-only)
	194.97.148.100 (metric 156416) from 194.97.148.100 (194.97.148.100)
	  Origin IGP, metric 0, localpref 100, valid, external


-> so from my PoV "incoming route-maps with continue statements are
working in SXF7 as documented", and I don't see any issue.

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de