[c-nsp] FWSM & Packeteer

[Ge Moua]

We have that deployment over here.

The VLANs handled by the FWSM will be trunked.  Your firewalled hosts will
be behind a an interface on a line-card on your 6500/7600 (or another switch
trunked to the 6500/7600).  Good luck.



:-)
Regards,
Ge Moua | Email: moua0100 at umn.edu

Network Design Engineer
University of Minnesota | Networking & Telecommunications Services
2218 University Ave SE | Minneapolis, MN 55414-3029
Office: 612.626.2779 | Pager: 612.648.0103 | Fax: 612.626.1818

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Velasquez Venegas
Jaime Omar
Sent: Thursday, February 08, 2007 8:27 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] FWSM & Packeteer

I've been asked to set a Packeteer Packetshaper demo with our Cisco FWSM.
However FWSM doesn't have physical ports to attach to packetshaper box as
the guide states.
Has anyone deployed a scenario with both working?




_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/