[c-nsp] route-map 'continue' broken in 6500 12.2(18)SXF6?

[Sachin Gupta (sagupta)]

This is not supported on 6500 at this time but is a planned feature (not
committed for a release yet).

Sachin

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Gert Doering
Sent: Thursday, February 08, 2007 1:05 PM
To: Collins, Richard (SNL US)
Cc: Gert Doering; james at towardex.com; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] route-map 'continue' broken in 6500 12.2(18)SXF6?

Hi,

On Thu, Feb 08, 2007 at 10:34:06AM -0800, Collins, Richard (SNL US)
wrote:
> I took another look at my setup with the 7613, Sup720 and 12.2(18)SXF6
> 
> It does indeed seem to work on the SXF6 but only for an input 
> route-map such as Gert's example.
> 
> This is not working for an output route-map (should it or does it for
> SXF7?)

Outbound "continue" is a different feature that was added to Cisco BGP
much later than inbound.

I can't say right now whether it should work in SXF or not - one would
need to ask feature navigator (and hope that it knows about SX
releases).

gert
--
USENET is *not* the non-clickable part of WWW!
 
//www.muc.de/~gert/
Gert Doering - Munich, Germany
gert at greenie.muc.de
fax: +49-89-35655025
gert at net.informatik.tu-muenchen.de
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/