[c-nsp] route-map 'continue' broken in 6500 12.2(18)SXF6?

[Gert Doering]

Hi,

On Thu, Feb 08, 2007 at 10:34:06AM -0800, Collins, Richard (SNL US) wrote:
> I took another look at my setup with the 7613, Sup720 and 12.2(18)SXF6
> 
> It does indeed seem to work on the SXF6 but only for an input route-map
> such as Gert's example.
> 
> This is not working for an output route-map (should it or does it for
> SXF7?)

Outbound "continue" is a different feature that was added to Cisco BGP
much later than inbound.

I can't say right now whether it should work in SXF or not - one would need
to ask feature navigator (and hope that it knows about SX releases).

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de