[c-nsp] Problem with Cisco 7513 Router

[Rodney Dunn]

Please don't use the 7500 for broadband aggregation.

It was never designed to do that nor tested. You may
find some very strange issues with varios PPPoX setups
(such as forwarding to/from an MPLS network).

Curious, why did you go to a 75xx over the G1 in the first place?

Rodney

 

On Fri, Feb 09, 2007 at 04:40:38PM +0500, Kashif Shafeeq wrote:
> Hi Everybody, 
> 
> I am using 7206 (NPE-G1) with STM1 interface as my primary BRAS for all DSL users in my network. Now I have installed 7513 Series router with DS3 interface for BRAS backup. To minimized the configuration I am using "Range PVC" command on my primary BRAS subinterfaces for each DSLAM and now I want to use the same on Backup BRAS. But, currently this command is not supported in any IOS release for Cisco 7500 Series Router.Currently running firmware in 7513 router is "rsp-jk9sv-mz.124-8b.bin".
> 
> Do we have any alternate feature available for Range PVC command or any other IOS in which we have this feature supported for Cisco 7513 Router.
> 
> --
> Regards,
> kashif Shafeeq
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/