[c-nsp] GigE Limits - PPPOE

[Paul Stewart]

Thanks for the reply Oli... No, never heard of that command before....
Hopefully that's it! :)  Is there an equivalent show command to see the
current limit?

Paul


-----Original Message-----
From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com] 
Sent: Sunday, February 11, 2007 4:10 AM
To: Paul Stewart; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] GigE Limits - PPPOE

Paul Stewart <> wrote on Saturday, February 10, 2007 10:35 PM:

> Hi there... I'm trying to figure out if there's any limits I should be 
> concerned about on a 7206VXR GigE port serving PPPOE customers? I 
> posted a message the other day regarding a problem between an Occam 
> DSLAM and 7206VXR where after X number of customers, the customer 
> started having problems getting authenticated.  We downgraded from 
> 12.4.x back to the latest 12.3.x release and no difference.... Occam 
> feels this is a Cisco problem and I disagree at this point...

there is "pppoe limit per-vlan" command, which, by default, limits the
number of pppoe sessions per LAN (or Vlan) to 100.. Did you increase this
number (within the vpdn-group)?

	oli