[c-nsp] GigE Limits - PPPOE

[Oliver Boehmer (oboehmer)]

Paul Stewart <mailto:paul at paulstewart.org> wrote on Sunday, February 11,
2007 1:35 PM:

> Thanks for the reply Oli... No, never heard of that command before....
> Hopefully that's it! :)  Is there an equivalent show command to see
> the current limit?

except for "show run", don't think there is.. how does your current
config look like?

	oli


> 
> -----Original Message-----
> From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com]
> Sent: Sunday, February 11, 2007 4:10 AM
> To: Paul Stewart; cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] GigE Limits - PPPOE
> 
> Paul Stewart <> wrote on Saturday, February 10, 2007 10:35 PM:
> 
>> Hi there... I'm trying to figure out if there's any limits I should
>> be concerned about on a 7206VXR GigE port serving PPPOE customers? I
>> posted a message the other day regarding a problem between an Occam
>> DSLAM and 7206VXR where after X number of customers, the customer
>> started having problems getting authenticated.  We downgraded from
>> 12.4.x back to the latest 12.3.x release and no difference.... Occam
>> feels this is a Cisco problem and I disagree at this point...
> 
> there is "pppoe limit per-vlan" command, which, by default, limits the
> number of pppoe sessions per LAN (or Vlan) to 100.. Did you increase
> this 
> number (within the vpdn-group)?
> 
> 	oli