[c-nsp] Duplicate IP add on CAt6509

[Dave Lim]

hrmm,

My customer is PVST+ that is IEEE complaint. As for the HSRP group, there
are not many only 10 I will say.

So your suggestion is for me to migrate from hybrid to native and upgrade
the IOS to SXF5. Maybe you can elaborate on your case too if you remember?
:)


On 2/13/07, Alaerte.Vidali at nokia.com <Alaerte.Vidali at nokia.com> wrote:
>
>  Hum,,,Dave, I followed the replies you received and I agree that it can
> be loop. But I have seem this problem without loop. If you did search for
> loop on your network and did not find, maybe your case is similar to the one
> I faced.
>
> The configuration I troubleshoot is similar to yours, but it was native
> version.
> Anyway, here is the final solution for your analysis and verify if it
> apply to your case:
> The solution was migrate to SXF5 and from Cisco Compliant MST to IEEE
> Compliant. After these actions problem was solved.
>
> Are you using Cisco compliant MST?
> Do you have non default HSRP parameters?
> Do you have high number of HSRP groups?
>
> Regards,
> Alaerte
>
>  ------------------------------
> *From:* ext Dave Lim [mailto:dave.daturax at gmail.com]
> *Sent:* Monday, February 12, 2007 12:41 PM
> *To:* Vidali Alaerte (Nokia-NET/RioDeJaneiro)
> *Cc:* cisco-nsp at puck.nether.net
> *Subject:* Re: Duplicate IP add on CAt6509
>
> Hi Alaerte,
>
> Yes, I have configured etherchannel between the two cisco. Anyway this is
> the IOS info. Note that I am running hybrid mode.
>
> CatOS: 7.1(2)
> MSFC: 12.1(11b)E
>
>
> On 2/12/07, Alaerte.Vidali at nokia.com <Alaerte.Vidali at nokia.com > wrote:
> >
> >  Hi Dave,
> >
> > Maybe I can help. Can you send me the IOS version you are using?
> > Do you have channel between two Cisco?
> >
> > Cordially,
> > Alaerte
> >
>
>