[c-nsp] Catalyst 4503 problem?

[Niels Bakker]

* rbiotg at gmail.com (Robert Bugala) [Tue 13 Feb 2007, 12:04 CET]:
>I have two catalyst 4503, both running L3 software. Both catalyst are 
>connected together with single ethernet cable. Ports on both catalysts 
>are configured as routed ports, all other configuration is same. Both 
>cats got Supervisor II+TS.

Is that a crossed cable?  Generally, configuring speed and duplex 
manually disables autonegotiation and Auto-MDI(X) along with it.

For a GigE crosscable you need to cross more wires than just 1,3 and 2,6.


	-- Niels.

--