[c-nsp] 2621 with no flash

[Vincent De Keyzer]

I tried that (see below) - command is not recognised.

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Jonathan Charles
> Sent: jeudi 15 février 2007 16:42
> To: Vincent De Keyzer
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] 2621 with no flash
> 
> Try a show flash:
> 
> 
> 
> Jonathan
> 
> On 2/15/07, Vincent De Keyzer <vincent at dekeyzer.net> wrote:
> >
> > Hello,
> >
> >
> >
> > BRU001ro21#sh ver
> >
> > Cisco Internetwork Operating System Software
> >
> > IOS (tm) C2600 Software (C2600-IO3-M), Version 12.0(7)T,  RELEASE
> SOFTWARE
> > (fc2)
> >
> > Copyright (c) 1986-1999 by cisco Systems, Inc.
> >
> > Compiled Tue 07-Dec-99 03:30 by phanguye
> >
> > Image text-base: 0x80008088, data-base: 0x80814F5C
> >
> >
> >
> > ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
> >
> >
> >
> > BRU001ro21 uptime is 2 hours, 30 minutes
> >
> > System returned to ROM by power-on at 08:27:01 UTC Fri May 6 2005
> >
> > System restarted at 14:03:11 CET Thu Feb 15 2007
> >
> > System image file is "flash:c2600-io3-mz.120-7.bin"
> >
> >
> >
> > cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes
> of
> > memory.
> >
> > Processor board ID JAD05370FJX (2470153302)
> >
> > M860 processor: part number 0, mask 49
> >
> > Bridging software.
> >
> > X.25 software, Version 3.0.0.
> >
> > 2 FastEthernet/IEEE 802.3 interface(s)
> >
> > 32K bytes of non-volatile configuration memory.
> >
> >
> >
> > Configuration register is 0x2102
> >
> >
> >
> > BRU001ro21#sh flash
> >
> >                ^
> >
> > % Invalid input detected at '^' marker.
> >
> >
> >
> > BRU001ro21#sh file systems
> >
> > File Systems:
> >
> >
> >
> >      Size(b)     Free(b)      Type  Flags  Prefixes
> >
> >        29688       27041     nvram     rw   nvram:
> >
> >            -           -    opaque     rw   null:
> >
> >            -           -    opaque     rw   system:
> >
> >            -           -    opaque     ro   xmodem:
> >
> >            -           -    opaque     ro   ymodem:
> >
> >            -           -   network     rw   tftp:
> >
> >            -           -    opaque     wo   lex:
> >
> >            -           -   network     rw   rcp:
> >
> >            -           -   network     rw   ftp:
> >
> >
> >
> > BRU001ro21#
> >
> >
> >
> > If this router has no flash, how can it possibly have booted from
> > flash:c2600-io3-mz.120-7.bin ???
> >
> >
> >
> > Vincent
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/