[c-nsp] 2621 with no flash

[Jonathan Charles]

No you tried a show flash

Try a show flash:



Jonathan

On 2/15/07, Vincent De Keyzer <vincent at dekeyzer.net> wrote:
>
> I tried that (see below) - command is not recognised.
>
> > -----Original Message-----
> > From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> > bounces at puck.nether.net] On Behalf Of Jonathan Charles
> > Sent: jeudi 15 février 2007 16:42
> > To: Vincent De Keyzer
> > Cc: cisco-nsp at puck.nether.net
> > Subject: Re: [c-nsp] 2621 with no flash
> >
> > Try a show flash:
> >
> >
> >
> > Jonathan
> >
> > On 2/15/07, Vincent De Keyzer <vincent at dekeyzer.net> wrote:
> > >
> > > Hello,
> > >
> > >
> > >
> > > BRU001ro21#sh ver
> > >
> > > Cisco Internetwork Operating System Software
> > >
> > > IOS (tm) C2600 Software (C2600-IO3-M), Version 12.0(7)T,  RELEASE
> > SOFTWARE
> > > (fc2)
> > >
> > > Copyright (c) 1986-1999 by cisco Systems, Inc.
> > >
> > > Compiled Tue 07-Dec-99 03:30 by phanguye
> > >
> > > Image text-base: 0x80008088, data-base: 0x80814F5C
> > >
> > >
> > >
> > > ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
> > >
> > >
> > >
> > > BRU001ro21 uptime is 2 hours, 30 minutes
> > >
> > > System returned to ROM by power-on at 08:27:01 UTC Fri May 6 2005
> > >
> > > System restarted at 14:03:11 CET Thu Feb 15 2007
> > >
> > > System image file is "flash:c2600-io3-mz.120-7.bin"
> > >
> > >
> > >
> > > cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K
> bytes
> > of
> > > memory.
> > >
> > > Processor board ID JAD05370FJX (2470153302)
> > >
> > > M860 processor: part number 0, mask 49
> > >
> > > Bridging software.
> > >
> > > X.25 software, Version 3.0.0.
> > >
> > > 2 FastEthernet/IEEE 802.3 interface(s)
> > >
> > > 32K bytes of non-volatile configuration memory.
> > >
> > >
> > >
> > > Configuration register is 0x2102
> > >
> > >
> > >
> > > BRU001ro21#sh flash
> > >
> > >                ^
> > >
> > > % Invalid input detected at '^' marker.
> > >
> > >
> > >
> > > BRU001ro21#sh file systems
> > >
> > > File Systems:
> > >
> > >
> > >
> > >      Size(b)     Free(b)      Type  Flags  Prefixes
> > >
> > >        29688       27041     nvram     rw   nvram:
> > >
> > >            -           -    opaque     rw   null:
> > >
> > >            -           -    opaque     rw   system:
> > >
> > >            -           -    opaque     ro   xmodem:
> > >
> > >            -           -    opaque     ro   ymodem:
> > >
> > >            -           -   network     rw   tftp:
> > >
> > >            -           -    opaque     wo   lex:
> > >
> > >            -           -   network     rw   rcp:
> > >
> > >            -           -   network     rw   ftp:
> > >
> > >
> > >
> > > BRU001ro21#
> > >
> > >
> > >
> > > If this router has no flash, how can it possibly have booted from
> > > flash:c2600-io3-mz.120-7.bin ???
> > >
> > >
> > >
> > > Vincent
> > >
> > > _______________________________________________
> > > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>