[c-nsp] Different SUPs in 7604

Yevgeniy Voloshin yevgeniy.voloshin at gmail.com
Wed Feb 21 07:56:10 EST 2007


Thanks Peter!

Can You provide 'show inventory' output?

---
Yev.

2007/2/21, Peter Salanki <peter.salanki at bahnhof.net>:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> This will work.
>
> 21 feb 2007 kl. 13.45 skrev Yevgeniy Voloshin:
>
> > Is it possible to use two different SUPs 32 - WS-SUP32-GE-3B and
> > WS-SUP32-10GE-3B in one 7604?
> >
> > I found only this info:
> > http://www.cisco.com/en/US/products/hw/routers/ps368/
> > products_data_sheet0900aecd8027cc3e.html
> > Supervisor support: Cisco Catalyst 6500 Supervisor Engine 32 (WS-
> > SUP32-GE-3B
> > and WS-SUP32-10GE-3B), Cisco Catalyst 6500 Supervisor Engine 720
> > (WS-SUP720-3B and WS-SUP720-3BXL), and the new Cisco Route Switch
> > Processor
> > 720 (RSP720-3C and RSP720-3CXL)
> > The Cisco 7604 can be configured two ways: with a single supervisor
> > engine
> > and up to three line cards, or with dual supervisor engines and up
> > to two
> > line cards for high availability and redundancy
> >
> > I need 2x10GE and 8x1GE ports.
> >
> > TIA!
> >
> > ---
> > Yev.
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> Sincerely
>
> Peter Salanki
> CTO
> Bahnhof AB (AS8473)
> www.bahnhof.se
> Office: +46855577132
> Cell: +46709174932
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.2.2 (Darwin)
>
> iD8DBQFF3EBFiQKhdiFGiogRAhpzAKCRW5yLx2B6JxM5zwZvhh/lq9MAngCdHZXz
> UCSZtYwMOdTqFEM50/stGCU=
> =U+j9
> -----END PGP SIGNATURE-----
>


More information about the cisco-nsp mailing list