[c-nsp] 12.2SR PB on CCO for 65xx and 76xx split

[Sukumar Subburayan]

Gert,

SX* will work on 76xx chassis going forward. You may not be able to 
order new 76xx chassis configuration with SX* code.

However, SX* train will not restrict customers downloading SX* code from 
CCO and installing them on their 76xx chassis.

sukumar

  On Wed, 21 Feb 2007, Gert Doering wrote:

> Hi,
>
> On Wed, Feb 21, 2007 at 10:22:42AM -0500, Rodney Dunn wrote:
>> My understanding is that there will no restriction of running
>> SX on a 76xx chassis.
>
> If I read this correctly:
>
> "As shown in Figure 1, a customer can continue to use Cisco IOS
> Software Release 12.2SX images for future software releases for
> pure Cisco Catalyst 6500 chassis environments, 12.2SXF images for
> mixed chassis environments, or the customer can migrate to the
> Cisco 7600 Series routers with Cisco IOS Software Release 12.2SR."
>
> this means "SXF will continue to work for both, but SXG (or whatever
> comes next) will only work for 'pure Cisco Catalyst 6500...'".
>
>
> Whatever: I'm not trusting these folks anymore.
>
> So I expect "the first really usable modular IOS" (with IPv6 and MPLS)
> to be SXG or SXH, and it won't run on our hardware.
>
>
> (Hmmm.  I wonder when the announcement "oh, btw, SRC will not run on
> LAN-type interface cards anymore" will come...)
>
> gert
> -- 
> USENET is *not* the non-clickable part of WWW!
>                                                           //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             gert at greenie.muc.de
> fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>