[c-nsp] Cisco 877 and Telus ADSL

[Peter Hicks]

William,

William wrote:

> does anyone have a working config for a Cisco 877 on Telus broadband?
> I'm currently trying to configure one remotely and I'm having issues
> finding documents on what authentication they use. The helpdesk has
> mentioned they do it via Mac address which isnt something I'm use to
> as over here in the UK we use PPPoA. Any insight would be appreciated.

Sounds like you're in a similar situation to the one I was in with an ISP in 
Helsinki.

Try this:

interface ATM0
  no ip address
  no atm auto-configuration
  no atm ilmi-keepalive
  no atm address-registration
  no atm ilmi-enable
  bundle-enable
  dsl operating-mode auto
  dsl enable-training-log
  bridge-group 1
  bridge-group 1 spanning-disabled
  hold-queue 224 in
  pvc <vpi>/<vci>
   broadcast
   encapsulation aal5snap
  !
!
interface BVI1
  ip address dhcp
!

Check the VPI and VCI values before putting them in the config.

Let me know how you get on


Peter

-- 
Peter Hicks | e: my.name at poggs.co.uk | g: 0xE7C839F4 | w: www.poggs.com

   A: Because it destroys the flow of the conversation
   Q: Why is top-posting bad?