[c-nsp] User Based Rate Limiting in PFC3BXL + Netflow Data Export

[Tim Stevenson]

Yes, it is possible. 33SXH delivers per-interface NF creation; you 
can have NDE on one interface and UBRL on another interface in the 
same system. But not both on a single interface.

Also today you can have NDE enabled, and UBRL enabled on an L2 only vlan.

Tim

At 01:14 PM 1/4/2007 -0800, Ian Cox opined:
>At 09:23 PM 1/4/2007 +0100, Peter Salanki wrote:
> >Thanks for the quick answare. Is this something that will be fixed
> >in the future, or is the limitation in pfc hardware?
>
>In theory I think what can occur is you could run NDE on one
>interface, and user based rate limiting on interfaces running NDE.
>When per interface NDE gets shipped you may be able to do this, that
>should be coming in the next major releases on 6500 and 7600. I don't
>have a development release of this booted on nay of my systems to try
>out if this is true.
>
>
>Ian
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.