[c-nsp] SFPs with DOM on 6500

[Saku Ytti]

On (2007-01-08 12:16 +0100), Mohacsi Janos wrote:
 
> DOM is mostly optics matter, but the current Cisco 6500/7600 linecards 
> does not have capability to read the DOM data from SFP-s.
> 
> >show inter trans
>                                          Optical   Optical
>          Temperature  Voltage  Current   Tx Power  Rx Power
> Port     (Celsius)    (Volts)  (mA)      (dBm)     (dBm)
> -------  -----------  -------  --------  --------  --------
> Te9/1      39.1       0.00       7.9      -0.9      -9.4
> 
> 
> However we have 4 DOM capable SFP in the WS-X6724 above.
> 
> According to Cisco:
> http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_table09186a00804b6f90.html
> 
> As you can see: SFP-s are supported in SPA-based routers....

Ouch, anyone happen to know reason for this? I have hard time understanding
how this could possibly be hardware issue, if the system can read vendor
code, I can't see how it couldn't read DOM data.
Or is it simply not yet implemented in SFP blades software?

-- 
  ++ytti