[c-nsp] SFPs with DOM on 6500

[Mohacsi Janos]

On Mon, 8 Jan 2007, Saku Ytti wrote:

> On (2007-01-08 08:53 +0100), Mohacsi Janos wrote:
>
>> DOM is currently supported on SIP-SPA cards + gigE port ports on
>> supervisors (after 12.2(18)SXE). As far as I know support for switching
>> card ports are not possible (WS-X6{5,7}xx) - may be next generation
>> switcing cards will support it. Buy 3750  ;-) which is supporting DOM on
>> all SFP ports...
>
> Dom is optics matter, not linecard. WS-X67xx is happy to do DOM.

DOM is mostly optics matter, but the current Cisco 6500/7600 linecards 
does not have capability to read the DOM data from SFP-s.

e.g.:

>show mod
Mod Ports Card Type                              Model              Serial 
No.
--- ----- -------------------------------------- ------------------
   5    2  Supervisor Engine 720 (Active)         WS-SUP720-BASE     ....
   7   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       ....
   9    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      ....


>show inter trans
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).

                                          Optical   Optical
          Temperature  Voltage  Current   Tx Power  Rx Power
Port     (Celsius)    (Volts)  (mA)      (dBm)     (dBm)
-------  -----------  -------  --------  --------  --------
Te9/1      39.1       0.00       7.9      -0.9      -9.4


However we have 4 DOM capable SFP in the WS-X6724 above.

According to Cisco:
http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_table09186a00804b6f90.html


As you can see: SFP-s are supported in SPA-based routers....

Regards,

 	Janos Mohacsi